Do you own room that could benefit from a ceiling fan Installing a ceiling fan is as straightforward as replacing your current light fixture. All of the wires you need is already there so the only thing is to replace the current workbox with one that is made for the weight of a ceiling fan. It would be very hazardous if you do not swap your current workbox to something that can handle the added weight of the ceiling fan. Before you begin your project, go through the guidelines for the fan you have selected, and make sure that you have all of the needed tools.

If you plan to have the fan over a cathedral ceiling, you will need to purchase an extension to ensure the fan wont be so high up. Once you are ready for the real installation, make sure that the breaker is switched off, so no power is going to the light you are swapping. When you remove the light fixture, check to see if the current workbox can handle the extra weight. Usually they aren't created for a ceiling fan, so you will have to add more additional support. You could do this fairly easily if you are able to gain access to the light fixture from the attic.

To add new support, you simply nail a 2x4 involving the ceiling rafters in order that it touches the top of the workbox. Make sure that the 2x4 is secured and then attach on the box to the wood. If everything is performed correctly, the weight of the fan will now be absolutely supported by the wood and the screws. woodworking plans If you dont possess access to the attic, you will ought to place a cross bracing in your ceiling. It is more hard to perform and may not be that reliable but its the ideal option if you have no attic admission.

Once you have placed the fan together according to the instructions, you are ready to deploy the fan to your light fixture. The challenging part is joining the wiring while retaining the fan. It will rely on the type of fan you have, many come with a bracket with a J hook while others have a holding frame woodworking plans. For most fans the wall switch will turn the device on or off, as the chain will handle the speeds. If you prefer a light kit together with your fan, they can be controlled by either chain or wall switch.

The next step is to go by the wiring details which are as simple as hooking up two white wires, two black wires and two ground wires. Once you have completed putting together the fan and wiring, the last step is to install the fan blades. Once this is all finished, it is time to flip the breaker back on to see if it functions woodworking plans.